Name: Single Channel Vehicle Loop Detector
SKU: 8524
Price: 6500.00 INR
Availability: InStock

Description

New Parking System Single-channel Induction Loop Detector Vehicle

This product is an inductive coil type vehicle loop detector, which is mainly used to detect the presence and passage of vehicles.
Existence mode, filter, automatic sensitivity enhancement, sensitivity level, and frequency selection can be set, with a reset

The detector must be installed in a convenient weatherproof location as close to the loop as possible. Installation location must choose to stay away from the heat source,
it around other devices must maintain a distance of at least 10mm (mustn’t fix cling to the cabinet). A correct loop configuration
and detector installation will ensure a successful inductive loop detection system. vehicle loop detector of several important parameters include:
loop figure, size, and turns install methods (details as “Loop installation guide”).

No	Item	Data
1	Frequency range	20KHz to 200KHz
2	Response time	50mS
3	Signal holding time	Permanent or limited existence
4	Detecting ring lead wire	For the longest 200 meters, the total resistance is less than 80hm, at least 20 revolutions per meter
5	Detection loop inductance	limit value 40uH to 1000uH, ideal value 80uH to 300uH
6	Working temperature	-40℃ to 85℃

To eliminate the interference of two neighboring wire loops or loop detectors, the frequency can be altered.
The sensitivity of the detector allows the detector to be selective as to the change of
inductance necessary to produce an output. There are four sensitivity selections and are set as follows by DIP3 and DIP4 Switch.

There are no reviews yet.

Be the first to review “Single Channel Vehicle Loop Detector”